Name: September
Brand: Scania
SKU: I0840I

ProRemote 2

Part nr.: 3289706

Part Description:

Scania ProRemote – Full Control in Your Hand

A NEW LEVEL OF CONTROL FOR SCANIA DRIVERS
Scania ProRemote is more than just a tool – it’s an intelligent control system that simplifies and enhances your workday. Whether you’re outside the cab, loading cargo, adjusting suspension height, or monitoring engine data, you have full control – right in your hand.

REAL-TIME MONITORING – SAFETY AND PRECISION, IN REAL TIME
Scania ProRemote allows the driver to monitor load weight from outside the vehicle – all in real time. This ensures that every load is perfectly balanced and compliant with both weight restrictions and industry regulations.

INTELLIGENT LOAD ADJUSTMENT
With automatic axle detection, the receiver unit identifies the number of axles on a potential trailer. You instantly receive the data needed for safe and efficient loading – no guesswork required.

ADVANCED VEHICLE CONTROL – RIGHT FROM YOUR HAND
Scania ProRemote offers an extensive set of features that provide remote control and real-time monitoring of the truck’s most critical
systems – directly from the device.

ENGINE CONTROL

Remote engine start and shutdown
Emergency engine shutdown
Engine running status icon
Engine speed and torque control:
Display current RPM
Idle / High idle mode
Intresse / Decrease RPM in intervals
Remote Vehicle Level Control (mm)
Normal driving height
Exhaust bellows release
Memory height levels
STOP function for all suspension adjustments
PTO (Power Take-Off) Control
Support for ED 1+2,, EG 1+2

Additional Remote Functions

Hazard signal activation
Alternating main beam flashing
Work lights and driving light control
Activation/deactivation of driving lights
Horn

ON-SCREEN INFORMATION – EVERYTHING YOU NEED TO KNOW

The ProRemote screen displays real-time data and alerts so you're always in control:
Fuel level
Fuel consumption
Battery voltage
Oil level
Pop-up warnings (e.g. high engine coolant temperature) – tap to acknowledge

CONVENIENCE AND CHARGING
Equipped with a magnetic base charger and USB-C connection, your ProRemote device is always charged and ready for use – minimizing downtime and keeping your truck on the road.

EXCLUSIVELY DESIGNED FOR SCANIA
The system is specifically developed for Scania trucks and is compatible with the NTG generation. It features a 3.5-inch touch screen (1,200 nits) for crystal-clear visibility, giving you immediate access to all the tools you need for precise loading.

NOTE:
In order for the device to monitor the weight, the truck needs to have full air suspension.
The truck needs to be equipped with the BCI (Bodywork – FPC5837A) control unit and to have the EXT CAN-Bus enabled at 250kbps.
In order for the engine start to work, the truck must be prepared with “Remote engine start” - FPC3313B.
In order for the engine speed control to function, “Type of Control” in SDP3 (or SWS) needs to be set into “External Can”
For Trucks with SESAMM7 electrical system, please check local homologation regulations for GSR Cybersecurity relevance as the product is not included in Scania's VWTA for complete vehicles.

Scania ProRemote – Full Control in Your Hand

A NEW LEVEL OF CONTROL FOR SCANIA DRIVERS
Scania ProRemote is more than just a tool – it’s an intelligent control system that simplifies and enhances your workday. Whether you’re outside the cab, loading cargo, adjusting suspension height, or monitoring engine data, you have full control – right in your hand.

REAL-TIME MONITORING – SAFETY AND PRECISION, IN REAL TIME
Scania ProRemote allows the driver to monitor load weight from outside the vehicle – all in real time. This ensures that every load is perfectly balanced and compliant with both weight restrictions and industry regulations.

INTELLIGENT LOAD ADJUSTMENT
With automatic axle detection, the receiver unit identifies the number of axles on a potential trailer. You instantly receive the data needed for safe and efficient loading – no guesswork required.

ADVANCED VEHICLE CONTROL – RIGHT FROM YOUR HAND
Scania ProRemote offers an extensive set of features that provide remote control and real-time monitoring of the truck’s most critical
systems – directly from the device.

ENGINE CONTROL

Remote engine start and shutdown
Emergency engine shutdown
Engine running status icon
Engine speed and torque control:
Display current RPM
Idle / High idle mode
Intresse / Decrease RPM in intervals
Remote Vehicle Level Control (mm)
Normal driving height
Exhaust bellows release
Memory height levels
STOP function for all suspension adjustments
PTO (Power Take-Off) Control
Support for ED 1+2,, EG 1+2

Additional Remote Functions

Hazard signal activation
Alternating main beam flashing
Work lights and driving light control
Activation/deactivation of driving lights
Horn

ON-SCREEN INFORMATION – EVERYTHING YOU NEED TO KNOW

The ProRemote screen displays real-time data and alerts so you're always in control:
Fuel level
Fuel consumption
Battery voltage
Oil level
Pop-up warnings (e.g. high engine coolant temperature) – tap to acknowledge

CONVENIENCE AND CHARGING
Equipped with a magnetic base charger and USB-C connection, your ProRemote device is always charged and ready for use – minimizing downtime and keeping your truck on the road.

EXCLUSIVELY DESIGNED FOR SCANIA
The system is specifically developed for Scania trucks and is compatible with the NTG generation. It features a 3.5-inch touch screen (1,200 nits) for crystal-clear visibility, giving you immediate access to all the tools you need for precise loading.

NOTE:
In order for the device to monitor the weight, the truck needs to have full air suspension.
The truck needs to be equipped with the BCI (Bodywork – FPC5837A) control unit and to have the EXT CAN-Bus enabled at 250kbps.
In order for the engine start to work, the truck must be prepared with “Remote engine start” - FPC3313B.
In order for the engine speed control to function, “Type of Control” in SDP3 (or SWS) needs to be set into “External Can”
For Trucks with SESAMM7 electrical system, please check local homologation regulations for GSR Cybersecurity relevance as the product is not included in Scania's VWTA for complete vehicles.

Scania ProRemote – Full Control in Your Hand

A NEW LEVEL OF CONTROL FOR SCANIA DRIVERS
Scania ProRemote is more than just a tool – it’s an intelligent control system that simplifies and enhances your workday. Whether you’re outside the cab, loading cargo, adjusting suspension height, or monitoring engine data, you have full control – right in your hand.

REAL-TIME MONITORING – SAFETY AND PRECISION, IN REAL TIME
Scania ProRemote allows the driver to monitor load weight from outside the vehicle – all in real time. This ensures that every load is perfectly balanced and compliant with both weight restrictions and industry regulations.

INTELLIGENT LOAD ADJUSTMENT
With automatic axle detection, the receiver unit identifies the number of axles on a potential trailer. You instantly receive the data needed for safe and efficient loading – no guesswork required.

ADVANCED VEHICLE CONTROL – RIGHT FROM YOUR HAND
Scania ProRemote offers an extensive set of features that provide remote control and real-time monitoring of the truck’s most critical
systems – directly from the device.

ENGINE CONTROL

Remote engine start and shutdown
Emergency engine shutdown
Engine running status icon
Engine speed and torque control:
Display current RPM
Idle / High idle mode
Intresse / Decrease RPM in intervals
Remote Vehicle Level Control (mm)
Normal driving height
Exhaust bellows release
Memory height levels
STOP function for all suspension adjustments
PTO (Power Take-Off) Control
Support for ED 1+2,, EG 1+2

Additional Remote Functions

Hazard signal activation
Alternating main beam flashing
Work lights and driving light control
Activation/deactivation of driving lights
Horn

ON-SCREEN INFORMATION – EVERYTHING YOU NEED TO KNOW

The ProRemote screen displays real-time data and alerts so you're always in control:
Fuel level
Fuel consumption
Battery voltage
Oil level
Pop-up warnings (e.g. high engine coolant temperature) – tap to acknowledge

CONVENIENCE AND CHARGING
Equipped with a magnetic base charger and USB-C connection, your ProRemote device is always charged and ready for use – minimizing downtime and keeping your truck on the road.

EXCLUSIVELY DESIGNED FOR SCANIA
The system is specifically developed for Scania trucks and is compatible with the NTG generation. It features a 3.5-inch touch screen (1,200 nits) for crystal-clear visibility, giving you immediate access to all the tools you need for precise loading.

NOTE:
In order for the device to monitor the weight, the truck needs to have full air suspension.
The truck needs to be equipped with the BCI (Bodywork – FPC5837A) control unit and to have the EXT CAN-Bus enabled at 250kbps.
In order for the engine start to work, the truck must be prepared with “Remote engine start” - FPC3313B.
In order for the engine speed control to function, “Type of Control” in SDP3 (or SWS) needs to be set into “External Can”
For Trucks with SESAMM7 electrical system, please check local homologation regulations for GSR Cybersecurity relevance as the product is not included in Scania's VWTA for complete vehicles.

Add to list

Front protection, Black, for G,R & S cabs with normal or high bumpers.

Part nr.: 3240793

Part Description:

Rugged, yet stylish front protection bar. High version. Made from 76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged, yet stylish front protection bar. High version. Made from 76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged, yet stylish front protection bar. High version. Made from 76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Add to list

Front protection, Black, for P,G,R & S cabs with normal or high bumpers.

Part nr.: 3240794

Part Description:

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Add to list

3171016 Vision X VL series square 9-LED 45W W/DT ADR

Vision X VL series square 9-LED 45W W/DT ADR

Part nr.: 3171016

Part Description:

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 15,6Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Robust aluminium.
Easy installation with only + & – cables.
Voltage: 9-32 volts.
Current consumption: 3.75 Amp @ 12V
Rating: IP67
Approval: ADR approved
Vibration Rating: 15.6 G
Height: 131 mm
Width: 110 mm
Depth: 60 mm
Weight: 900 grams
Watt: 45
Number of LED: 9 pcs. x 5W
Raw lumen: 4752
Effective lumens: 3326
EMC Approval: CISPR25 Class 3.

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 15,6Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Robust aluminium.
Easy installation with only + & – cables.
Voltage: 9-32 volts.
Current consumption: 3.75 Amp @ 12V
Rating: IP67
Approval: ADR approved
Vibration Rating: 15.6 G
Height: 131 mm
Width: 110 mm
Depth: 60 mm
Weight: 900 grams
Watt: 45
Number of LED: 9 pcs. x 5W
Raw lumen: 4752
Effective lumens: 3326
EMC Approval: CISPR25 Class 3.

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 15,6Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Robust aluminium.
Easy installation with only + & – cables.
Voltage: 9-32 volts.
Current consumption: 3.75 Amp @ 12V
Rating: IP67
Approval: ADR approved
Vibration Rating: 15.6 G
Height: 131 mm
Width: 110 mm
Depth: 60 mm
Weight: 900 grams
Watt: 45
Number of LED: 9 pcs. x 5W
Raw lumen: 4752
Effective lumens: 3326
EMC Approval: CISPR25 Class 3.

Add to list

3171029 Vision X BLACKTIPS 5 LED 35W 60° ADR MIL-STD-461 24V BLACK

Vision X BLACKTIPS 5 LED 35W 60° ADR MIL-STD-461 24V BLACK

Part nr.: 3171029

Part Description:

Blacktips are Vision X’s latest addition on the heavy side, developed for tough applications such as e.g. mining industry, contracting, forestry, etc. This model of Blacktips is specifically adapted for military use.
Blacktips uses the latest generation of diodes that provide up to 80-90 lumens per watt, which is the highest efficiency, for the moment, that can be achieved in terms of LED lighting. It provides an enormous light that is unbeatable in terms of other lighting of the same size.
This lamp complies with MIL-STD-461. Can only be used with 24V. The lamp house and holder are painted in a durable black color and the lamp has a black background, for a more discreet appearance.

Data:
LED: 5 x 7W Cree, Light color temp: 6000K
Effective lumens: 3305, Raw lumens: 4000
Voltage: 24V, Current consumption: 1.46 Amp @ 24V
Watt: 35W, Contact: Deutsch DT04-2P
Attachment type: Trunnion & Single bolt
Weight:1.00kg, Width:116mm, Height:100mm, Depth:75mm
IP class: IP69K, Vibration class 21.2 Grms
EMC approval: Military standard 461F, MIL-STD-461
ADR-classified, CE-approved
Lens material: Polycarbonate, Housing material: Aluminum
Lamp housing coating: Marine Grade Anti-corrosion
Light pattern: 60° WideFlood

Blacktips are Vision X’s latest addition on the heavy side, developed for tough applications such as e.g. mining industry, contracting, forestry, etc. This model of Blacktips is specifically adapted for military use.
Blacktips uses the latest generation of diodes that provide up to 80-90 lumens per watt, which is the highest efficiency, for the moment, that can be achieved in terms of LED lighting. It provides an enormous light that is unbeatable in terms of other lighting of the same size.
This lamp complies with MIL-STD-461. Can only be used with 24V. The lamp house and holder are painted in a durable black color and the lamp has a black background, for a more discreet appearance.

Data:
LED: 5 x 7W Cree, Light color temp: 6000K
Effective lumens: 3305, Raw lumens: 4000
Voltage: 24V, Current consumption: 1.46 Amp @ 24V
Watt: 35W, Contact: Deutsch DT04-2P
Attachment type: Trunnion & Single bolt
Weight:1.00kg, Width:116mm, Height:100mm, Depth:75mm
IP class: IP69K, Vibration class 21.2 Grms
EMC approval: Military standard 461F, MIL-STD-461
ADR-classified, CE-approved
Lens material: Polycarbonate, Housing material: Aluminum
Lamp housing coating: Marine Grade Anti-corrosion
Light pattern: 60° WideFlood

Blacktips are Vision X’s latest addition on the heavy side, developed for tough applications such as e.g. mining industry, contracting, forestry, etc. This model of Blacktips is specifically adapted for military use.
Blacktips uses the latest generation of diodes that provide up to 80-90 lumens per watt, which is the highest efficiency, for the moment, that can be achieved in terms of LED lighting. It provides an enormous light that is unbeatable in terms of other lighting of the same size.
This lamp complies with MIL-STD-461. Can only be used with 24V. The lamp house and holder are painted in a durable black color and the lamp has a black background, for a more discreet appearance.

Data:
LED: 5 x 7W Cree, Light color temp: 6000K
Effective lumens: 3305, Raw lumens: 4000
Voltage: 24V, Current consumption: 1.46 Amp @ 24V
Watt: 35W, Contact: Deutsch DT04-2P
Attachment type: Trunnion & Single bolt
Weight:1.00kg, Width:116mm, Height:100mm, Depth:75mm
IP class: IP69K, Vibration class 21.2 Grms
EMC approval: Military standard 461F, MIL-STD-461
ADR-classified, CE-approved
Lens material: Polycarbonate, Housing material: Aluminum
Lamp housing coating: Marine Grade Anti-corrosion
Light pattern: 60° WideFlood

Add to list

3171031 Vision X VL Series compact 3-LED 15W W/DT ADR

Vision X VL Series compact 3-LED 15W W/DT ADR

Part nr.: 3171031

Part Description:

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 21 Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Composite
Lens: Polycarbonate
Mount: Rustfree steel
Beam angle: Mixed 60°/40°
Easy installation with DT plug
Voltage: 9-32 volts.
Current consumption: 1.25 Amp @ 12V
Rating: IP68 / IP69K
Approval: ADR approved
Vibration Rating: 21 Grms
Height: 72 mm, Width: 119 mm, Depth: 51 mm
Weight: 200 grams
Watt: 15
Number of LED: 3 x 5W
Raw lumen: 1140, Effective lumens: 797
EMC Approval: CISPR25 Class 3
ECE approval: Yes, R23

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 21 Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Composite
Lens: Polycarbonate
Mount: Rustfree steel
Beam angle: Mixed 60°/40°
Easy installation with DT plug
Voltage: 9-32 volts.
Current consumption: 1.25 Amp @ 12V
Rating: IP68 / IP69K
Approval: ADR approved
Vibration Rating: 21 Grms
Height: 72 mm, Width: 119 mm, Depth: 51 mm
Weight: 200 grams
Watt: 15
Number of LED: 3 x 5W
Raw lumen: 1140, Effective lumens: 797
EMC Approval: CISPR25 Class 3
ECE approval: Yes, R23

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 21 Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Composite
Lens: Polycarbonate
Mount: Rustfree steel
Beam angle: Mixed 60°/40°
Easy installation with DT plug
Voltage: 9-32 volts.
Current consumption: 1.25 Amp @ 12V
Rating: IP68 / IP69K
Approval: ADR approved
Vibration Rating: 21 Grms
Height: 72 mm, Width: 119 mm, Depth: 51 mm
Weight: 200 grams
Watt: 15
Number of LED: 3 x 5W
Raw lumen: 1140, Effective lumens: 797
EMC Approval: CISPR25 Class 3
ECE approval: Yes, R23

Add to list

Camera AHD IR

Part nr.: 3165626

Part Description:

Rear view camera with built-in IR lamps

Improves visibility when driving in the dark

Add to list

DMS Camera

Part nr.: 3265084

Part Description:

Driver Monitoring System
Scania DMS with Deep-Learning technology can support drowsiness/attention warning and seat-belt reminder as well as periodic event data and video footage transfer.
Scania DMS offers robust Drowsiness and Distraction Warning because of deep
Learning algorithm so it is implementing face recognition even at various vehicle
environments such as sunlight, night and driver's facewears like mask, hat, sunglasses.
It detects and calculates head position detection ( x, y, z ), face direction detection
( yaw, pitch, Roll ), and eye opening/mouth opening/closing.
DMS can be integrated with MDAS-9N through Ethernet so that ADAS video and event data can be transmitted to Scania DMS, and then ADAS and DMS data can
be sent out simultaneously to a telematics device through RS232 cable.

Transmits real-time video via Ethernet
(ONVIF) or stores in SD card (Maximum 128G)
Alerts on :
Drowsiness
Distraction
Yawning
Mobile phone use
Not wearing seatbelt
Smoking

DC24V
Full HD, 88° field of view driver facing camera
SD card
Built-in WiFi for simple configuration using Mobile App (iOS and Android)
Operating temperature: -20°C to +70°C
Recording modes: Normal, G-sensor, driver status monitoring alert

Possible to add additional camera example dash cam 3265085.

Add to list

Multibox AHD 4CH

Part Description:

Add flexibility with this multibox, connect up to four cameras to any port of DDU. Create toghether with BCI trigger automated scenarios for customized camera views.
Connect to DDU or 10" stand alone monitor 3254867

• Analog HD video out
• IP69K Waterproof Rating
• Screen Switch Full / 2 way / 3 way / 4 split
• 4 trigger
• add parking lines
• 5 key button for manual toggle and menu access
• DC 24V
• Fits ECU rack
• Dimentions W175 H29 D196
• Temp. -20˚C ~ 70˚C
• Vibration resistant
• ADR compliant
• Weight 981g (device only)

For use with smart dash,
Not compatible with AUS4
need adapter 3203561 or 3186731 to connect to DDU camera port.

Add flexibility with this multibox, connect up to four cameras to any port of DDU. Create toghether with BCI trigger automated scenarios for customized camera views.
Connect to DDU or 10" stand alone monitor 3254867

• Analog HD video out
• IP69K Waterproof Rating
• Screen Switch Full / 2 way / 3 way / 4 split
• 4 trigger
• add parking lines
• 5 key button for manual toggle and menu access
• DC 24V
• Fits ECU rack
• Dimentions W175 H29 D196
• Temp. -20˚C ~ 70˚C
• Vibration resistant
• ADR compliant
• Weight 981g (device only)

For use with smart dash,
Not compatible with AUS4
need adapter 3203561 or 3186731 to connect to DDU camera port.

Add flexibility with this multibox, connect up to four cameras to any port of DDU. Create toghether with BCI trigger automated scenarios for customized camera views.
Connect to DDU or 10" stand alone monitor 3254867

• Analog HD video out
• IP69K Waterproof Rating
• Screen Switch Full / 2 way / 3 way / 4 split
• 4 trigger
• add parking lines
• 5 key button for manual toggle and menu access
• DC 24V
• Fits ECU rack
• Dimentions W175 H29 D196
• Temp. -20˚C ~ 70˚C
• Vibration resistant
• ADR compliant
• Weight 981g (device only)

For use with smart dash,
Not compatible with AUS4
need adapter 3203561 or 3186731 to connect to DDU camera port.

Add to list

Object detection box

Part nr.: 3268393

Part Description:

Add object detection to Scania camera system.
just connect the box between disired camera and DDU and you will get a object detection.
The box is pre set to detect pedestrians and bicyclists. but programmable to also detect other items as cars and buses.
connect to single camera feed or DVR/multibox output for more camera detection.
Mount optional speaker (included) if audible sound is required.
Warning is displayed as a Red/yellow square in monitor and a box around the object detected

• Detect pedestrians and bicycles.
Motorcycles, cars, buses, trucks (Optional)
• Optimized recognition distance and recognition area (ROI) can be set with remote control (optional)
• Digital zoom (DZoom)
• Video alarm (overlay) and alarm sound output / External Speaker (Included)
• Waterproof IP69K
• Trigger cable in and out (Optional)
• Dimentions 91x20,5x79mm
• Weight 264g
• 24V
• Operating temp -20℃ to ~70℃

For special installation options
Programming remote controller 3306220
Trigger cable 3313975.

For use with R158 camera, adaptors 3203573 and 3203575 is required.