Area view kit LHD – 2761021 Analogue

Part nr.: 2761021

Part Description:

Complete set 2761021 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Complete set 2761021 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Complete set 2761021 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Add to list

Area view kit RHD – 2761022 Analogue

Part nr.: 2761022

Part Description:

Complete set 2761022 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Complete set 2761022 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Complete set 2761022 contains:

10” OSD monitor, resolution 1280x800, contrast ratio 800:1
4 pcs Cameras, IP67, 1,3mpix, 185° viewing angle, 0,2Lux
1 pcs ECU and all cables needed, front cam 6m, side cam 10m, rear cam 18m.
1 pcs wired remote control button.
1 kit of flexible monitor bracket for mounting on side of IP,

Add to list

- Area view 360 Analogue without monitor

Part nr.: 2823098

Part Description:

Analogue 360 kit without monitor, for connection to the premium radio

Add to list

- DVR unit with WiFi

Part nr.: 2761024

Part Description:

DVR unit consists of a digital 2 channel recorder, 32GB SD card for approx. 36 hours recording time, a wifi device that allows a connection over smartphones or tablets with Android via a Camos App, to extract recordings or have a live view of the surroundings.
Possible to record all cameras separately or in birdsview mode.

Please check if usage of recording units is applicable by national legislations before offering this to customers.

DVR unit consists of a digital 2 channel recorder, 32GB SD card for approx. 36 hours recording time, a wifi device that allows a connection over smartphones or tablets with Android via a Camos App, to extract recordings or have a live view of the surroundings.
Possible to record all cameras separately or in birdsview mode.

Please check if usage of recording units is applicable by national legislations before offering this to customers.

DVR unit consists of a digital 2 channel recorder, 32GB SD card for approx. 36 hours recording time, a wifi device that allows a connection over smartphones or tablets with Android via a Camos App, to extract recordings or have a live view of the surroundings.
Possible to record all cameras separately or in birdsview mode.

Please check if usage of recording units is applicable by national legislations before offering this to customers.

Add to list

Calibration kit analogue 2761105

Part nr.: 2761105

Part Description:

Calibration kit for the analogue 360 system is required to adjust the cameras in panoramic view.
By doing this properly, the blindspots around the vheicle is limited to a minimum and gives the correct 360° view around the vheicle.

the kit consists of
2 pcs calibration mats with pattern, 7x2m
software package incl. calibration software, a variety of images, parking guide and a detailed how to manual.

The kit is reusable and should be stored in workshop.
Suitable for the analogue 360 system

Calibration kit for the analogue 360 system is required to adjust the cameras in panoramic view.
By doing this properly, the blindspots around the vheicle is limited to a minimum and gives the correct 360° view around the vheicle.

the kit consists of
2 pcs calibration mats with pattern, 7x2m
software package incl. calibration software, a variety of images, parking guide and a detailed how to manual.

The kit is reusable and should be stored in workshop.
Suitable for the analogue 360 system

Calibration kit for the analogue 360 system is required to adjust the cameras in panoramic view.
By doing this properly, the blindspots around the vheicle is limited to a minimum and gives the correct 360° view around the vheicle.

the kit consists of
2 pcs calibration mats with pattern, 7x2m
software package incl. calibration software, a variety of images, parking guide and a detailed how to manual.

The kit is reusable and should be stored in workshop.
Suitable for the analogue 360 system

Add to list