October

Scania ProRemote – Full Control in Your Hand

A NEW LEVEL OF CONTROL FOR SCANIA DRIVERS
Scania ProRemote is more than just a tool – it’s an intelligent control system that simplifies and enhances your workday. Whether you’re outside the cab, loading cargo, adjusting suspension height, or monitoring engine data, you have full control – right in your hand.

REAL-TIME MONITORING – SAFETY AND PRECISION, IN REAL TIME
Scania ProRemote allows the driver to monitor load weight from outside the vehicle – all in real time. This ensures that every load is perfectly balanced and compliant with both weight restrictions and industry regulations.

INTELLIGENT LOAD ADJUSTMENT
With automatic axle detection, the receiver unit identifies the number of axles on a potential trailer. You instantly receive the data needed for safe and efficient loading – no guesswork required.

ADVANCED VEHICLE CONTROL – RIGHT FROM YOUR HAND
Scania ProRemote offers an extensive set of features that provide remote control and real-time monitoring of the truck’s most critical
systems – directly from the device.

ENGINE CONTROL

• Remote engine start and shutdown
• Emergency engine shutdown
• Engine running status icon
• Engine speed and torque control:
• Display current RPM
• Idle / High idle mode
• Intresse / Decrease RPM in intervals
• Remote Vehicle Level Control (mm)
• Normal driving height
• Exhaust bellows release
• Memory height levels
• STOP function for all suspension adjustments
• PTO (Power Take-Off) Control
• Support for  ED 1+2,, EG 1+2

Additional Remote Functions

• Hazard signal activation
• Alternating main beam flashing
• Work lights and driving light control
• Activation/deactivation of driving lights
• Horn

ON-SCREEN INFORMATION – EVERYTHING YOU NEED TO KNOW

• The ProRemote screen displays real-time data and alerts so you're always in control:
• Fuel level
• Fuel consumption
• Battery voltage
• Oil level
• Pop-up warnings (e.g. high engine coolant temperature) – tap to acknowledge

CONVENIENCE AND CHARGING
Equipped with a magnetic base charger and USB-C connection, your ProRemote device is always charged and ready for use – minimizing downtime and keeping your truck on the road.

EXCLUSIVELY DESIGNED FOR SCANIA
The system is specifically developed for Scania trucks and is compatible with the NTG generation. It features a 3.5-inch touch screen (1,200 nits) for crystal-clear visibility, giving you immediate access to all the tools you need for precise loading.

NOTE:
In order for the device to monitor the weight, the truck needs to have full air suspension.
The truck needs to be equipped with the BCI (Bodywork – FPC5837A) control unit and to have the EXT CAN-Bus enabled at 250kbps.
In order for the engine start to work, the truck must be prepared with “Remote engine start” - FPC3313B.
In order for the engine speed control to function, “Type of Control” in SDP3 (or SWS) needs to be set into “External Can”
For Trucks with SESAMM7 electrical system, please check local homologation regulations for GSR Cybersecurity relevance as the product is not included in Scania's VWTA for complete vehicles.

Orange LED directional light economic, extra compact, lightweight, visible at 180° and ultra robust for your commercial vehicle. A directional light 100% compliant, able to meet ECE-R65 Class 1 (rules of the road) and ECE-R10 06 (Electromagnetic Confomity)  The SESA Pulsar referenced SPU.OR ! Directional lights are luminous devices for emergency vehicles or slow moving vehicles.  SESA Pulsar offers many advantages :                                                                      

- This directional light diffuses light with a visible angle of 180° thanks to its high intensity LED

- Lightweight, only 60 grams and extra compact, it measures 94 x 39 x 2

- ECE-R65 Class 1 and ECE-R10 06 approvals

- Bitension, it operates in 12-24 (10/32) and is able to resist up to a 50V peak voltage

- This directional light integrates 7 flash patterns : simple flash Cl1, simple flash Cl2, double flash Cl1, double flash Cl2, quadruple flash Cl1, quadruple flash Cl2, steady on (cruise mode)

- Up to 8 products can be synchronized

- This LED light has a low consumption, only 45A

-  It is made of a box in aluminum and a lens in UV resistant polycarbonate (PC)

- It has been designed for operating temperatures from -30 to +50°C

- This directional light is IP 69K watertight

- It is provided with 2 round head cross screws Ø 3.5-25L and a wired output

- This LED flashing light is easy to install and requires no maintenance

The WF26R is a powerful, durable and strong flashlight for those who need high performance, without waiting time.

With the WF26R, up to 3000 lumens are delivered over 450 meters, with four different light modes and two flashing modes. This with a battery life of up to 44 hours with the included li-ion battery. Two buttons on the rear end of the flashlight are used to select light modes.

The WF26R includes a charging station with a magnetic holder, which can be mounted on, for example, a B Pillar, for storing the flashlight when not in use. The flashlight has a built-in battery level indicator and the charging cable can be disconnected from the charging station if you want to charge the flashlight directly.

The Fenix WF26R is of course waterproof and dustproof as well as shock-resistant up to 1 meter with an IP68 rating.

This flashlight is a real workhorse, always ready to shine bright and long when needed.

Features:

Has a Luminus SST70 LED with a lifespan of 50,000 hours.
The charging holder, can be separated from the magnetic charging cable.
The magnetic charging holder can be attached to the desk/wall with two screws.
Instant activation and instant strobe with double rear switch.
Indication of starter battery and low voltage warning.
Made of A6061-T6 aluminum.
Premium type HAIII hard anodized anti-wear coating.

Data:
Brightness: 3000 lumens, Distance: 450 meters
IP class: IP68
Length:156 mm, Head: 40.4mm, Body: 26.6mm
Weight: 222 grams, including battery
Included in the package:
Fenix WF26R flashlight, Fenix ARB-L21-5000 V2.0 Li-ion battery, charging cradle, magnetic charging cable, lanyard, spare O-ring

XPR-S Halo light bar uses the so-called IRIS reflector technology with only 5° beam per diode which provides a longer range for the light..The Halo function is an optional feature that is possible to connect to the vehicles position light.

FEATURES:

Virtually unbreakable polycarbonate lens
High IP rating (IP 68)
Vibration resistant (15,6Grms)
Low power consumption relative to power
EMC tested (radio interference)
50,000 hour life time on diode

DATA:
Lamp housing: Robust aluminum
Voltage: 11-32V, Power consumption: 5 Amp at 12V
IP rating: IP68, Vibration Class: 15.6G
Working temperature: -40°C – + 80°C
Height: 70mm, Depth: 80mm, Width: 292.2mm
Watt: 60, LED: 6
Raw lumens: 6 474, Effective lumens: 4 531
Lens: Polycarbonate, Light Image: 6,5° Spot.

A low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo has a single row of the same powerful 5 watt CREE LEDs that the PX ramp has and a  Halo illumination effect that surrounds the reflectors.

Features:

Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms. 
Build in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional 
Halo effect on a separate wire.
DATA:
E-marked, Voltage: 9-32V, Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 335 mm
Weight: 0.95 kg
LED: 9 x 5 W, Watt: 45 W, Power consumption @12V: 3.75 A
Raw lumens: 4815, Effective lumens: 3371
Range @1Lux: 330 m

Vision X XPL Halo, a low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo is a single row lightbar with powerful 5 watt CREE LEDs and a cool Halo illumination effect that surrounds the reflectors.

Features:
5.5 years function warranty.
Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms.
Built in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin.
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional (Article No XPL-LEM).
Halo effect on a separate wire.

Data:
E-marked: Yes
Voltage: 9-32V
Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 527 mm
Weight: 1.4 kg
LED: 15 x 5 W
Watt: 75 W
Power consumption @12V: 6.25 A
Raw lumens: 8025, Effective lumens: 5618
Range @ 1 Lux: 451 m

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

E-marked
Lamp housing: Robust aluminum
Voltage: 24V
Power consumption: 2.5 Amp at 24V
IP class: IP68
Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 201mm
Watt: 60 LED: 12 pcs. x 5W
Raw lumen: 6 336. Effective lumen: 4,440
Lens: Polycarbonate
Light image: 25 ° Spot

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 3.75 Amp at 24V
IP class: IP68, Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 282mm
LED: 18 pcs. 5W
Raw lumen: 9,504, Effective lumen: 6,660
Lens: Polycarbonate
Light image: 10° Spot

Xmitter 21″ light bar with Black background and elliptical flood lenses with 30° height 65° spread to the sides.
Very high build quality with composit sides, IP69K high pressure water rating, same width as a european licence plate, high vibrations resistance and high quality sealing. UV resistant and gravelproof polycarbonate lens ensures many years of safe driving in the darkness

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 15 Amps at 24V
IP rating: IP68 & IP69K, Vibration Class: 15.6G
Operating temperature: -40°C –+80°C
Height: 75mm, Width: 85mm, Length: 525mm
Lens: Polycarbonate
Watt: 180W, LED: 36 pcs. x 5W
Raw lumens: 19 008 lm, Effective lumens: 13 320 lm
Light pattern: Combo 10° Spot and 30/65° flood

Blacktips are Vision X’s latest addition on the heavy side, developed for tough applications such as e.g. mining industry, contracting, forestry, etc. This model of Blacktips is specifically adapted for military use.
Blacktips uses the latest generation of diodes that provide up to 80-90 lumens per watt, which is the highest efficiency, for the moment, that can be achieved in terms of LED lighting. It provides an enormous light that is unbeatable in terms of other lighting of the same size.
This lamp complies with MIL-STD-461. Can only be used with 24V. The lamp house and holder are painted in a durable black color and the lamp has a black background, for a more discreet appearance.

Data:
LED: 5 x 7W Cree, Light color temp: 6000K
Effective lumens: 3305, Raw lumens: 4000
Voltage: 24V, Current consumption: 1.46 Amp @ 24V
Watt: 35W, Contact: Deutsch DT04-2P
Attachment type: Trunnion & Single bolt
Weight:1.00kg, Width:116mm, Height:100mm, Depth:75mm
IP class: IP69K, Vibration class  21.2 Grms
EMC approval: Military standard 461F, MIL-STD-461
ADR-classified, CE-approved
Lens material: Polycarbonate, Housing material: Aluminum
Lamp housing coating: Marine Grade Anti-corrosion
Light pattern: 60° WideFlood

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 21 Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Composite
Lens: Polycarbonate
Mount: Rustfree steel
Beam angle: Mixed 60°/40°
Easy installation with DT plug
Voltage: 9-32 volts.
Current consumption: 1.25 Amp @ 12V
Rating: IP68 / IP69K
Approval: ADR approved
Vibration Rating: 21 Grms
Height: 72 mm, Width: 119 mm, Depth: 51 mm
Weight: 200 grams
Watt: 15
Number of LED: 3 x 5W
Raw lumen: 1140, Effective lumens: 797
EMC Approval: CISPR25 Class 3
ECE approval: Yes, R23

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 15,6Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Robust aluminium.
Easy installation with only + & – cables.
Voltage: 9-32 volts.
Current consumption: 3.75 Amp @ 12V
Rating: IP67
Approval: ADR approved
Vibration Rating: 15.6 G
Height: 131 mm
Width: 110 mm
Depth: 60 mm
Weight: 900 grams
Watt: 45
Number of LED: 9 pcs. x 5W
Raw lumen: 4752
Effective lumens: 3326
EMC Approval: CISPR25 Class 3.

Utilise Cable Harness 3345443 (introduced 20251001) for more functions in spot light

Data:
Width: 304 mm
Height (w bracket): 97 mm
Depth: 97 mm
Weight: 1 700 grams
Wattage, spot: 60 W
Raw lumens, spot: 6420 lm
Range, spot @1Lux: 400 m
Wattage, flood: 70 W
Raw lumens, flood: 3550 lm
Reach, flood @1Lux: 110 m

Utilise Cable Harness 3345443 (introduced 20251001) for more functions in spot light

Data:
Width: 304 mm
Height (w bracket): 97 mm
Depth: 97 mm
Weight: 1 700 grams
Wattage, spot: 60 W
Raw lumens, spot: 6420 lm
Range, spot @1Lux: 400 m
Wattage, flood: 70 W
Raw lumens, flood: 3550 lm
Reach, flood @1Lux: 110 m

• Illuminated with 1 lux on 616m E-boost, 276m R112
• Effective lumens 10248 E-boost, 2049 R112
• E-mark Reference 12,5, Voltage 10-30V
• Effect 110W E-Boost, 22W R112
• Current 14,4V/7.6A E-boost, 1.5A R112
• EMC Approval R10, ECE Approval R7, R112
• Dimensions (LxHxW) 178 x 180 x 81 mm
• Connection Cable with Super Seal connector,
• IP rating IP68
• House material Aluminum, Light source LED
• Weight (kg) 1.5

Compact Scania branded rectangular LED cluster lamp,  Broad beam. 2 separate reflectors with optical lenses. Multivolt 16-33 V. 33 W, Black aluminium housing with built in cooling fins. Polycarbonate lens. GoreTex membrane valve. E-marked. Ref  25. IP 69. EMC CISPR25 class 5. Built in cable with DTconnector.  W 139 mm, D 74 mm, H incl. bracket 80 mm.

Rectangular LED cluster lamp, with position lamps function. Broad beam, Cree LED's 6 x 10 W, Black aluminium housing. Polycarbonate lens. E- marked. Ref 17.5. IP 67. Built in cable with AMP connector. W 245 mm, D 101 mm, H incl. bracket 158 mm. 

Kit incl. transparent stone chip protection cover, with phosphoric Griffin print.