Super Sticker kit

Part nr.: 3011593
Part Description:

The stickers are made of aluminium with a print. Easy mounting and are packed with left and right side stickers.

Add to list

SEE the rest of parts for product:
November

November

Assortment update

Scania ProRemote

Part nr.: 3190099
Part Description:

REAL-TIME MONITORING

Scania ProRemote allows the driver to see the load weight outside the vehicle, all in real time. This ensures that every load is perfectly balanced and compliant with weight restrictions and industry regulations.

CUSTOMISED FOR SCANIA

Uniquely designed for Scania trucks with Sesamm 6 electrical system registrated before 2024-06. The system has a 3.5-inch, 1200-nit touchscreen for crystal clear visibility, ensuring the tools you needed for precision charging are at your fingertips.

AUTOMATIC AXLE DETECTION:

The receiver unit automatically recognises the number of axles on a potential trailer and ensures that you have the correct information you need for safe and efficient loading.

CONVENIENCE:

The Scania ProRemote magnetic base charger and USB-C connection ensure that the unit is always ready to run, reducing downtime and keeping the truck on the road.

Elevate the trucking experience with Scania ProRemote – the pinnacle of precision and efficiency. When it comes to loading, rely on a solution engineered to perfection and exclusive to SCANIA. Ensure that every journey is safe and smooth.

Add to list

LED Warning light, Grote

Part nr.: 3193265
Part Description:

TECHNICAL CHARACTERISTICS
Operating voltage range 10 - 30 V
Operating temperature range -40° C bis + 60° C
Base PC, Decorative Ring PC, Lens PC, Inner Lens PC
Operating temperature range -40° C bis + 60° C


MECHANICAL CHARACTERISTICS
Mounting Screw
Sealing Sealing Ring
Connection Screw: 500 mm cable
IP Grade IP67

Add to list

Super plate, plastic

Part nr.: 3123995
Part Description:
No description available
Add to list

Sticker Super Roof

Part nr.: 3018688
Part Description:

Sticker dimension: h:118,3mm, w: 1080mm.

The sticker comes with a center mark which will not be visible when mounted.

Mounting instructions are delivered with the sticker, but can also be found in pictures.

Add to list

Front protection, Black, for G,R & S cabs with normal or high bumpers.

Part nr.: 3240793
Part Description:

Rugged, yet stylish front protection bar. High version. Made from  76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Add to list

Front protection, Black, for P,G,R & S cabs with normal or high bumpers.

Part nr.: 3240794
Part Description:

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Add to list

Badge holder L/H for high version

Part nr.: 2782223
Part Description:
No description available
Add to list

Model Badge Griffin

Part nr.: 2963680
Part Description:
No description available
Add to list

Scania Vabis badge

Part nr.: 2828792
Part Description:
Simple to install. Suitable for S, R, G, P 20 cabs. Supplied in a kit of two, for left and right-hand sides.
Add to list

V8 badge

Part nr.: 2828790
Part Description:
Simple to install. Suitable for S, R, G, P 20 cabs. Supplied in a kit of two, for left and right-hand sides.
Add to list

Scania badge

Part nr.: 2800833
Part Description:
Simple to install, suitable for S, R, G, P 20 cabs. Supplied in a kit of two, for left and right-hand sides.
Add to list

Super badge

Part nr.: 2828791
Part Description:
Simple to install. Suitable for S, R, G, P 20 cabs. Supplied in a kit of two, for left and right-hand sides.
Add to list

King of the Road badge

Part nr.: 2828793
Part Description:
Simple to install. Suitable for S, R, G, P 20 cabs. Supplied in a kit of two, for left and right-hand sides.
Add to list

Heated floor pad - seat heater kit

Part nr.: 2293832
Part Description:
A very neat solution for keeping the floor warm and dry. Simply place it under the existing floor mat. This version connects to the heated seat. There is also a universal version that plugs into the 24v outlet of any vehicle. Both versions can be used on either the driver or passenger side.
Add to list

Heated floor pad - Universal 24 V kit

Part nr.: 2293833
Part Description:
A very neat solution for keeping the floor warm and dry. Simply place it under the existing floor mat. This version connects a 24 V outlet of any vehicle. There is also a version that connects to the heated seat. Both versions can be used on either the driver or passenger side.
Add to list

Bracket Integration Kit R-series

Part nr.: 3246386
Part Description:
Bracket for  Integration of light bar in front hatch R-series cab
Add to list

Cable Harness Hatch integration

Part nr.: 3246385
Part Description:
For connection of spot light bars
Add to list