August

Rugged, yet stylish front protection bar. High version. Made from  76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged, yet stylish front protection bar. High version. Made from polished 76 & 60 mm stainless steel.

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 2761789.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included ) 

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel.

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.   

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers. 

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included ) 

REAL-TIME MONITORING

Scania ProRemote allows the driver to see the load weight outside the vehicle, all in real time. This ensures that every load is perfectly balanced and compliant with weight restrictions and industry regulations.

CUSTOMISED FOR SCANIA

Uniquely designed for Scania trucks. The system has a 3.5-inch, 1200-nit touchscreen for crystal clear visibility, ensuring the tools you needed for precision charging are at your fingertips.

AUTOMATIC AXLE DETECTION:

The receiver unit automatically recognises the number of axles on a potential trailer and ensures that you have the correct information you need for safe and efficient loading.

CONVENIENCE:

The Scania ProRemote magnetic base charger and USB-C connection ensure that the unit is always ready to run, reducing downtime and keeping the truck on the road.

Elevate the trucking experience with Scania ProRemote – the pinnacle of precision and efficiency. When it comes to loading, rely on a solution engineered to perfection and exclusive to SCANIA. Ensure that every journey is safe and smooth.

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

E-marked
Lamp housing: Robust aluminum
Voltage: 24V
Power consumption: 2.5 Amp at 24V
IP class: IP68
Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 201mm
Watt: 60 LED: 12 pcs. x 5W
Raw lumen: 6 336
Effective lumen: 4,440
Lens: Polycarbonate
Light image: 10 ° Spot

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

E-marked
Lamp housing: Robust aluminum
Voltage: 24V
Power consumption: 2.5 Amp at 24V
IP class: IP68
Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 201mm
Watt: 60 LED: 12 pcs. x 5W
Raw lumen: 6 336. Effective lumen: 4,440
Lens: Polycarbonate
Light image: 25 ° Spot

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 3.75 Amp at 24V
IP class: IP68, Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 282mm
LED: 18 pcs. 5W
Raw lumen: 9,504, Effective lumen: 6,660
Lens: Polycarbonate
Light image: 10° Spot

Xmitter 21″ light bar with Black background and elliptical flood lenses with 30° height 65° spread to the sides.
Very high build quality with composit sides, IP69K high pressure water rating, same width as a european licence plate, high vibrations resistance and high quality sealing. UV resistant and gravelproof polycarbonate lens ensures many years of safe driving in the darkness

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 15 Amps at 24V
IP rating: IP68 & IP69K, Vibration Class: 15.6G
Operating temperature: -40°C –+80°C
Height: 75mm, Width: 85mm, Length: 525mm
Lens: Polycarbonate
Watt: 180W, LED: 36 pcs. x 5W
Raw lumens: 19 008 lm, Effective lumens: 13 320 lm
Light pattern: Combo 10° Spot and 30/65° flood

XPR-S Halo light bar uses the so-called IRIS reflector technology with only 5° beam per diode which provides a longer range for the light..The Halo function is an optional feature that is possible to connect to the vehicles position light.

FEATURES:

Virtually unbreakable polycarbonate lens
High IP rating (IP 68)
Vibration resistant (15,6Grms)
Low power consumption relative to power
EMC tested (radio interference)
50,000 hour life time on diode

DATA:
Lamp housing: Robust aluminum
Voltage: 11-32V, Power consumption: 5 Amp at 12V
IP rating: IP68, Vibration Class: 15.6G
Working temperature: -40°C – + 80°C
Height: 70mm, Depth: 80mm, Width: 292.2mm
Watt: 60, LED: 6
Raw lumens: 6 474, Effective lumens: 4 531
Lens: Polycarbonate, Light Image: 6,5° Spot.

Vision X XPL Halo, a low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo is a single row lightbar with powerful 5 watt CREE LEDs and a cool Halo illumination effect that surrounds the reflectors.

Features:
5.5 years function warranty.
Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms.
Built in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin.
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional (Article No XPL-LEM).
Halo effect on a separate wire.

Data:
E-marked: Yes
Voltage: 9-32V
Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 527 mm
Weight: 1.4 kg
LED: 15 x 5 W
Watt: 75 W
Power consumption @12V: 6.25 A
Raw lumens: 8025, Effective lumens: 5618
Range @ 1 Lux: 451 m