September

REAL-TIME MONITORING

Scania ProRemote allows the driver to see the load weight outside the vehicle, all in real time. This ensures that every load is perfectly balanced and compliant with weight restrictions and industry regulations.

CUSTOMISED FOR SCANIA

Uniquely designed for Scania trucks with Sesamm 6 electrical system registrated before 2024-06. The system has a 3.5-inch, 1200-nit touchscreen for crystal clear visibility, ensuring the tools you needed for precision charging are at your fingertips.

AUTOMATIC AXLE DETECTION:

The receiver unit automatically recognises the number of axles on a potential trailer and ensures that you have the correct information you need for safe and efficient loading.

CONVENIENCE:

The Scania ProRemote magnetic base charger and USB-C connection ensure that the unit is always ready to run, reducing downtime and keeping the truck on the road.

Elevate the trucking experience with Scania ProRemote – the pinnacle of precision and efficiency. When it comes to loading, rely on a solution engineered to perfection and exclusive to SCANIA. Ensure that every journey is safe and smooth.

Rugged, yet stylish front protection bar. High version. Made from  76 & 60 mm stainless steel, Black execusion.

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers.

For P cabs we recommenmd the low version, p/n 3240794.

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, badge holder, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Rugged yet stylish front protection bar. Low version. Made from polished 76 & 60 mm stainless steel. Black Execusion

The bar is designed to allow easy mounting, easy folding  and access/usage of the original tow bar, as the lower end pipes are easily removed without using any tools.

It's also possible to remove the vertical pipes, for replacement if damaged. The bar is also prepared with fiting points fit LED bars, with special optional brackets to the upper vertical bars. Wire harness premounted in the lower section.  

Made to fit Scania P,G ,R & S cabs, with normal or high bumpers. 0 mm protrusion bumper is recommended for best possible clearence, but it will fit also to 40 mm protrusion bumpers

Does NOT fit low bumpers or protruded "XT" steel bumpers.

Mounting hardware, 8 x lamps brackets and mounting instruction included.

( Lamps are not included )

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

E-marked
Lamp housing: Robust aluminum
Voltage: 24V
Power consumption: 2.5 Amp at 24V
IP class: IP68
Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 201mm
Watt: 60 LED: 12 pcs. x 5W
Raw lumen: 6 336
Effective lumen: 4,440
Lens: Polycarbonate
Light image: 10 ° Spot

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

E-marked
Lamp housing: Robust aluminum
Voltage: 24V
Power consumption: 2.5 Amp at 24V
IP class: IP68
Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 201mm
Watt: 60 LED: 12 pcs. x 5W
Raw lumen: 6 336. Effective lumen: 4,440
Lens: Polycarbonate
Light image: 25 ° Spot

Xmitter Prime Xtreme, by far the most efficient and powerful LED ramp on the market. Prime Xtreme delivers the most lumens per centimeter of ramp and therefore provides an incredible amount of light from a small unit.

This is the Black Edition version of this LED ramp, with a black background that gives a more discreet look than previously chrome background.

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 3.75 Amp at 24V
IP class: IP68, Vibration class: 15.6G
Working temperature: -40°C –+80°C
Height: 95.25mm, Depth: 84.07mm, Width: 282mm
LED: 18 pcs. 5W
Raw lumen: 9,504, Effective lumen: 6,660
Lens: Polycarbonate
Light image: 10° Spot

Xmitter 21″ light bar with Black background and elliptical flood lenses with 30° height 65° spread to the sides.
Very high build quality with composit sides, IP69K high pressure water rating, same width as a european licence plate, high vibrations resistance and high quality sealing. UV resistant and gravelproof polycarbonate lens ensures many years of safe driving in the darkness

DATA:
E-marked
Lamp housing: Robust aluminum
Voltage: 24V, Power consumption: 15 Amps at 24V
IP rating: IP68 & IP69K, Vibration Class: 15.6G
Operating temperature: -40°C –+80°C
Height: 75mm, Width: 85mm, Length: 525mm
Lens: Polycarbonate
Watt: 180W, LED: 36 pcs. x 5W
Raw lumens: 19 008 lm, Effective lumens: 13 320 lm
Light pattern: Combo 10° Spot and 30/65° flood

XPR-S Halo light bar uses the so-called IRIS reflector technology with only 5° beam per diode which provides a longer range for the light..The Halo function is an optional feature that is possible to connect to the vehicles position light.

FEATURES:

Virtually unbreakable polycarbonate lens
High IP rating (IP 68)
Vibration resistant (15,6Grms)
Low power consumption relative to power
EMC tested (radio interference)
50,000 hour life time on diode

DATA:
Lamp housing: Robust aluminum
Voltage: 11-32V, Power consumption: 5 Amp at 12V
IP rating: IP68, Vibration Class: 15.6G
Working temperature: -40°C – + 80°C
Height: 70mm, Depth: 80mm, Width: 292.2mm
Watt: 60, LED: 6
Raw lumens: 6 474, Effective lumens: 4 531
Lens: Polycarbonate, Light Image: 6,5° Spot.

A low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo has a single row of the same powerful 5 watt CREE LEDs that the PX ramp has and a  Halo illumination effect that surrounds the reflectors.

Features:

Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms. 
Build in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional 
Halo effect on a separate wire.
DATA:
E-marked, Voltage: 9-32V, Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 335 mm
Weight: 0.95 kg
LED: 9 x 5 W, Watt: 45 W, Power consumption @12V: 3.75 A
Raw lumens: 4815, Effective lumens: 3371
Range @1Lux: 330 m

Vision X XPL Halo, a low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo is a single row lightbar with powerful 5 watt CREE LEDs and a cool Halo illumination effect that surrounds the reflectors.

Features:
5.5 years function warranty.
Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms.
Built in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin.
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional (Article No XPL-LEM).
Halo effect on a separate wire.

Data:
E-marked: Yes
Voltage: 9-32V
Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 527 mm
Weight: 1.4 kg
LED: 15 x 5 W
Watt: 75 W
Power consumption @12V: 6.25 A
Raw lumens: 8025, Effective lumens: 5618
Range @ 1 Lux: 451 m

The WF26R is a powerful, durable and strong flashlight for those who need high performance, without waiting time.

With the WF26R, up to 3000 lumens are delivered over 450 meters, with four different light modes and two flashing modes. This with a battery life of up to 44 hours with the included li-ion battery. Two buttons on the rear end of the flashlight are used to select light modes.

The WF26R includes a charging station with a magnetic holder, which can be mounted on, for example, a B Pillar, for storing the flashlight when not in use. The flashlight has a built-in battery level indicator and the charging cable can be disconnected from the charging station if you want to charge the flashlight directly.

The Fenix WF26R is of course waterproof and dustproof as well as shock-resistant up to 1 meter with an IP68 rating.

This flashlight is a real workhorse, always ready to shine bright and long when needed.

Features:

Has a Luminus SST70 LED with a lifespan of 50,000 hours.
The charging holder, can be separated from the magnetic charging cable.
The magnetic charging holder can be attached to the desk/wall with two screws.
Instant activation and instant strobe with double rear switch.
Indication of starter battery and low voltage warning.
Made of A6061-T6 aluminum.
Premium type HAIII hard anodized anti-wear coating.

Data:
Brightness: 3000 lumens, Distance: 450 meters
IP class: IP68
Length:156 mm, Head: 40.4mm, Body: 26.6mm
Weight: 222 grams, including battery
Included in the package:
Fenix WF26R flashlight, Fenix ARB-L21-5000 V2.0 Li-ion battery, charging cradle, magnetic charging cable, lanyard, spare O-ring

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 15,6Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Robust aluminium.
Easy installation with only + & – cables.
Voltage: 9-32 volts.
Current consumption: 3.75 Amp @ 12V
Rating: IP67
Approval: ADR approved
Vibration Rating: 15.6 G
Height: 131 mm
Width: 110 mm
Depth: 60 mm
Weight: 900 grams
Watt: 45
Number of LED: 9 pcs. x 5W
Raw lumen: 4752
Effective lumens: 3326
EMC Approval: CISPR25 Class 3.

Blacktips are Vision X’s latest addition on the heavy side, developed for tough applications such as e.g. mining industry, contracting, forestry, etc. This model of Blacktips is specifically adapted for military use.
Blacktips uses the latest generation of diodes that provide up to 80-90 lumens per watt, which is the highest efficiency, for the moment, that can be achieved in terms of LED lighting. It provides an enormous light that is unbeatable in terms of other lighting of the same size.
This lamp complies with MIL-STD-461. Can only be used with 24V. The lamp house and holder are painted in a durable black color and the lamp has a black background, for a more discreet appearance.

Data:
LED: 5 x 7W Cree, Light color temp: 6000K
Effective lumens: 3305, Raw lumens: 4000
Voltage: 24V, Current consumption: 1.46 Amp @ 24V
Watt: 35W, Contact: Deutsch DT04-2P
Attachment type: Trunnion & Single bolt
Weight:1.00kg, Width:116mm, Height:100mm, Depth:75mm
IP class: IP69K, Vibration class  21.2 Grms
EMC approval: Military standard 461F, MIL-STD-461
ADR-classified, CE-approved
Lens material: Polycarbonate, Housing material: Aluminum
Lamp housing coating: Marine Grade Anti-corrosion
Light pattern: 60° WideFlood

The VL-Series LED Light Duty offers outstanding light output in a functional design which can be easily adjusted with a single bolt bracket. High quality construction and components enable VL-Series LED Light Duty to withstand vibrations up to 21 Grms. Built-in reverse polartity protection helps prevent accidental damage caused by incorrect installation.

VL-Series Led Light Duty work lightning is a high value, versatile range designed for many light duty commercial applications.

Data:
Lamp housing: Composite
Lens: Polycarbonate
Mount: Rustfree steel
Beam angle: Mixed 60°/40°
Easy installation with DT plug
Voltage: 9-32 volts.
Current consumption: 1.25 Amp @ 12V
Rating: IP68 / IP69K
Approval: ADR approved
Vibration Rating: 21 Grms
Height: 72 mm, Width: 119 mm, Depth: 51 mm
Weight: 200 grams
Watt: 15
Number of LED: 3 x 5W
Raw lumen: 1140, Effective lumens: 797
EMC Approval: CISPR25 Class 3
ECE approval: Yes, R23

Black zinc. Brackets are Not included.

Stainless steel with Scania logotype, platinum. Supplied in packages of 10 caps.