Vision X LED light bar spotlamps.

LED cluster spotlamp, possible to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9. Black alu housing,  Clear Polycarbonate lens, 12 LED's, Scania version incl. cable with Tyco connector, 24 V, IP68, E9.

LED cluster spotlamp kit, to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9.

Containing 2 x  spotlamps p/n 2390145 + 2 x brackets.

Black alu housing,  Clear Polycarbonate lens, 12 LED's, Scania version incl. cable with Tyco  connector, 24 V, IP68, E9.

LED group spotlamp, can be mounted in new sun visor, replaces Scania original Halogen spotlamp part number 2081558/9. Black aluminium body, white exterior lens made of polycarbonate, 12 LEDs, wide beam: 25 degrees Scania version incl. cable with Tyco connector, 24 V, IP68, E9.

LED cluster spotlamp kit, to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9.

Containing 2 x  spotlamps p/n 2484670 + 2 x brackets.

Black alu housing,  Clear Polycarbonate lens, 12 LED's, Broad beam: 25 degrees. Scania version incl. cable with Tyco  connector, 24 V, IP68, E9.

LED cluster spotlamp in same family as p/n 2390145. Black alu housing,  Clear Polycarbonate lens,  Double row, 18 x 5 W LED's, Pencil beam 10 degree light distribution. Ref. 25. Effective Lumens: 6660. DTconnector 24 V, IP68, E9.

LED upgrade kit for the classic Scania PRG series sunvisor, with factory fitted halogen spotlamps. With phosforic Griffin print.

This kit contains of 2 x metal brackets to fit 4 x Vision X Optimus 10 W LED lamps ( x 2 per side ). 15 degree beampattern, with optional halo/position light function. Ref 7,5. 

Phosforic Griffin printed on 2 x lamps per kit. Cable harness included. Special bracket included fits directly into the existing halogen lamp bracket.

This kit will give your classic Scania a modern look and provide a more concentrated beam, but still with an aura covering a wider area closer to the vehicle. Light temperature provided is much whiter, vs the original Halogen. 

NB Optional halo function may not be applicable with local legistlation. Make sure to check your local legistlation before connecting this built in, optional function.

LED upgrade kit for the classic Scania PRG series sunvisor, with factory fitted halogen spotlamps. Without phosforic Griffin print, mainly for markets where prints are not street legal.

This kit contains of 2 x metal brackets to fit 4 x Vision X Optimus 10 W LED lamps ( x 2 per side ). 15 degree beampattern, with optional halo/position light function. Ref 7,5.

Phosforic Griffin printed on 2 x lamps per kit. Cable harness included. Special bracket included fits directly into the existing halogen lamp bracket.

This kit will give your classic Scania a modern look and provide a more concentrated beam, but still with an aura covering a wider area closer to the vehicle. Light temperature provided is much whiter, vs the original Halogen.

NB Optional halo function may not be applicable with local legistlation. Make sure to check your local legistlation before connecting this built in, optional function.

A low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo has a single row of the same powerful 5 watt CREE LEDs that the PX ramp has and a  Halo illumination effect that surrounds the reflectors.

Features:

Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms. 
Build in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional 
Halo effect on a separate wire.
DATA:
E-marked, Voltage: 9-32V, Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 335 mm
Weight: 0.95 kg
LED: 9 x 5 W, Watt: 45 W, Power consumption @12V: 3.75 A
Raw lumens: 4815, Effective lumens: 3371
Range @1Lux: 330 m

Vision X XPL Halo, a low profile LED light bar for extra discrete mounting on modern vehicles where much light is desired without taking up too much space and attention. XPL Halo is a single row lightbar with powerful 5 watt CREE LEDs and a cool Halo illumination effect that surrounds the reflectors.

Features:
5.5 years function warranty.
Robust aluminium/composite housing.
Unbreakable polycarbonate lens.
Moisture resistant pressure relief valve.
Heavy duty construction – can withstand vibrations up to 15.6 Grms.
Built in EMC interference filter (CISPR 25) – won’t disturb vehicles electronic systems.
Active temperature control with Prime Drive and ETM.
CE approved, RoHS certified.
Waterproof IP68/IP69K.
Colour temperature 6000 Kelvin.
Temperature tested from -40°C to +80°C.
Relay wiring included.
Mounting feet included, side wing mounts is optional (Article No XPL-LEM).
Halo effect on a separate wire.

Data:
E-marked: Yes
Voltage: 9-32V
Light pattern: 10° Spot
Height: 52 mm, Width: 61 mm, Length: 527 mm
Weight: 1.4 kg
LED: 15 x 5 W
Watt: 75 W
Power consumption @12V: 6.25 A
Raw lumens: 8025, Effective lumens: 5618
Range @ 1 Lux: 451 m

Utilise Cable Harness 3345443 (introduced 20251001) for more functions in spot light

Data:
Width: 304 mm
Height (w bracket): 97 mm
Depth: 97 mm
Weight: 1 700 grams
Wattage, spot: 60 W
Raw lumens, spot: 6420 lm
Range, spot @1Lux: 400 m
Wattage, flood: 70 W
Raw lumens, flood: 3550 lm
Reach, flood @1Lux: 110 m

Utilise Cable Harness 3345443 (introduced 20251001) for more functions in spot light

Data:
Width: 304 mm
Height (w bracket): 97 mm
Depth: 97 mm
Weight: 1 700 grams
Wattage, spot: 60 W
Raw lumens, spot: 6420 lm
Range, spot @1Lux: 400 m
Wattage, flood: 70 W
Raw lumens, flood: 3550 lm
Reach, flood @1Lux: 110 m