Vision X LED light bar spotlamps.

LED cluster spotlamp, possible to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9. Black alu housing,  Clear Polycarbonate lens, 12 LED's, Scania version incl. cable with Tyco connector, 24 V, IP68, E9.

LED cluster spotlamp kit, to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9.

Containing 2 x  spotlamps p/n 2390145 + 2 x brackets.

Black alu housing,  Clear Polycarbonate lens, 12 LED's, Scania version incl. cable with Tyco  connector, 24 V, IP68, E9.

LED group spotlamp, can be mounted in new sun visor, replaces Scania original Halogen spotlamp part number 2081558/9. Black aluminium body, white exterior lens made of polycarbonate, 12 LEDs, wide beam: 25 degrees Scania version incl. cable with Tyco connector, 24 V, IP68, E9.

LED cluster spotlamp kit, to fit in new sunvisor, replacing Scania original Halogen spotlamp p/n 2081558/9.

Containing 2 x  spotlamps p/n 2484670 + 2 x brackets.

Black alu housing,  Clear Polycarbonate lens, 12 LED's, Broad beam: 25 degrees. Scania version incl. cable with Tyco  connector, 24 V, IP68, E9.

LED upgrade kit for the classic Scania PRG series sunvisor, with factory fitted halogen spotlamps. With phosforic Griffin print.

This kit contains of 2 x metal brackets to fit 4 x Vision X Optimus 10 W LED lamps ( x 2 per side ). 15 degree beampattern, with optional halo/position light function. Ref 7,5. 

Phosforic Griffin printed on 2 x lamps per kit. Cable harness included. Special bracket included fits directly into the existing halogen lamp bracket.

This kit will give your classic Scania a modern look and provide a more concentrated beam, but still with an aura covering a wider area closer to the vehicle. Light temperature provided is much whiter, vs the original Halogen. 

NB Optional halo function may not be applicable with local legistlation. Make sure to check your local legistlation before connecting this built in, optional function.

LED upgrade kit for the classic Scania PRG series sunvisor, with factory fitted halogen spotlamps. Without phosforic Griffin print, mainly for markets where prints are not street legal.

This kit contains of 2 x metal brackets to fit 4 x Vision X Optimus 10 W LED lamps ( x 2 per side ). 15 degree beampattern, with optional halo/position light function. Ref 7,5.

Phosforic Griffin printed on 2 x lamps per kit. Cable harness included. Special bracket included fits directly into the existing halogen lamp bracket.

This kit will give your classic Scania a modern look and provide a more concentrated beam, but still with an aura covering a wider area closer to the vehicle. Light temperature provided is much whiter, vs the original Halogen.

NB Optional halo function may not be applicable with local legistlation. Make sure to check your local legistlation before connecting this built in, optional function.